Connecting radios all over the world

Icom IC-A120 Airband radio

The Airband radio Icom IC-A120 can be remote controlled through Mimer SoftRadio giving the operator the ability to set operating channel, squelch level and ofcourse audio and PTT.

Channel/frequency selection is made by stepping up/down or by entering the channel name on the keypad. There is a virtual keypad on the control head and you can use the PC keyboard.

Connection to the radio is made both from the front microphone connector and from the rear speaker connector.

No special programming is needed in the radio.

Suitable Network Interface is 3009/36.
Cable kit 3166.

If you do not need the ability to change channel or set the squelch, you can use the simpler solution described on this page. (Same as for IC-A110)

Examples of use:

  • Local use when several dispatchers want to share one radio
  • Remote use where a dispatcher at one location want to talk to radio users at a different location
  • CrossPatch between Marine radio channels and other two way radios, like analogue, IDAS, DMR, Tetra or MPT
Mimer SoftRadio

Virtual Control Panel for IC-A120

Squelch setting in progress

Alternative setting with white background

Supported radio models:

  • IC-A120
  • IC-A120E

Network Interface 3009/36

Cable kit 3166

System examples:

One operator and one radio

One airband radio remote controlled from one operator PC.

Operators working with both Airband radios and Tetra

Two airband radios and one Tetra radio remote controlled from two operator PC´s.

Back to Top